Residential House Painting Heathwood – Causes Of Paint Blisters and What To Do About It
Residential house painting Heathwood can easily transform a dull looking house into a bright, fresh looking property. Painting the room will throw an entirely new feel. However, with any transformation, you may also end up getting a few bumps down the road. When painting is not done right, your wall may end up with paint blisters or bubbles.
So why do walls sometimes end up with these common problems after painting? Let us discuss the causes of bubbling paint.
Paint blisters or paint bubbles happen the paint loses its adhesion to the base coat of paint or the underlying surface such as drywall, plaster, and wood. Bubbles mostly lead to peeling, which would make your wall look bad.
Most common reasons why paint blisters or bubbles occur:
- The painting surface was dirty.
- You skipped the primer.
- The painting surface or surroundings were moist.
- The painting surface or surroundings were too hot.
- You painted with the wrong roller cover.
What to do about it?
Some may do the painting again to fix the problem, but that’s not a long-term solution because the troublesome bubbling paint would likely re-appear soon enough, making the second paint job ineffective. Instead, the best way to get rid of the bubbles is to first identify the cause and address the problem to prevent it from ruining your next coat.
Use the paint scraper or putty knife to scrape the paint bubbles off the wall. Sand down the area where the bubbles used to be until the area is smooth and the division between the paint and the wall is seamless. Make sure to clean the spot and free from any grease or dust before you apply a new coat to fix bubbling paint.